Using a Boresighter to Pre-Zero a Hunting Rifle
A boresighter helps place a hunting rifle’s scope close to the correct point of impact before live firing. It does not replace a proper range zero, but it can save ammunition and reduce the time needed to bring a new optic into a reliable sight picture.
For Australian hunters, this is especially useful when a rifle has been fitted with a new scope, transported between properties, or stored for the off-season. A pre-zero can get you close before travelling from Melbourne to a regional range or from Brisbane into the bush.
The process is straightforward when the rifle is unloaded, the bolt is removed where practical, and the firearm is supported securely. A boresighter aligns the optic with the bore, while live ammunition confirms where the projectile actually lands.
| Boresighter Type | Main Advantage | Limitation | Best Use |
|---|---|---|---|
| Chamber laser | Fast and easy to use | May vary slightly between cartridges | Quick scope installation |
| Muzzle laser | Visible alignment at distance | Must fit correctly and stay centred | General pre-zeroing |
| Optical collimator | No battery required | Requires a suitable muzzle device | Short-range alignment |
| Digital or combination unit | Extra measurement features | Higher cost and more setup | Frequent rifle work |
Choose The Right Boresighter
A chamber laser is usually the simplest option for a centrefire hunting rifle. It sits in the chamber like a cartridge and projects a laser along the bore line. Select the exact cartridge designation, such as .308 Winchester or .223 Remington, rather than assuming similar-looking rounds are interchangeable.
Muzzle-mounted lasers can work across several calibres when fitted with the correct adapter. The device must sit centrally and firmly; a crooked attachment can create a misleading reference. Optical collimators are another option, although their usefulness depends on the rifle and muzzle configuration.
Before buying, check compatibility with the rifle, suppressor or muzzle brake, and scope height. A retailer’s product description should state the supported calibres and fitting method clearly.
Prepare The Rifle And Workspace
Unload the firearm completely, remove the magazine, open the action, and physically check the chamber. Keep ammunition in a separate location while setting up the rifle. Follow the manufacturer’s instructions and your state or territory’s safe-handling requirements.
Place the rifle on stable front and rear supports. A bench, shooting rest, or properly padded bags are preferable to balancing the stock on an uneven surface. Check that the scope rings are tight and that the optic is level. If the stock does not fit comfortably, guidance on rifle stock adjustment can help establish a consistent cheek weld before sighting.
Lighting matters with a laser. Indoor walls or a shaded target at a suitable distance make the dot easier to see. Never point the rifle at people, occupied buildings, roads, or any area where a projectile could cause harm, even when the firearm is unloaded.
Align The Scope At Short Range
Set a target at roughly 25 metres for the first adjustment. This distance is common at Australian ranges and provides enough separation to identify a major error without wasting ammunition. Activate the boresighter and look through the scope without moving the rifle.
Adjust the windage and elevation turrets until the reticle is close to the laser dot. Do not chase tiny differences at this stage. The laser represents the bore line, while the scope sits above it, so the reticle and dot will not necessarily occupy the same point at every distance.
A chamber laser can show a useful reference, but tolerances in the chamber, device, and optic mounts affect precision. Treat the result as a starting position rather than a confirmed zero.
Make Adjustments Methodically
Move the reticle in small, deliberate increments. If the scope’s adjustment markings state that one click equals ¼ MOA at 100 yards, the movement at 25 metres will be considerably smaller than a full marking might suggest. Use the scope manual rather than relying on memory.
After each adjustment, look away briefly and reacquire the sight picture. This helps prevent eye strain and makes it easier to notice whether the rifle or the boresighter has shifted. If the dot moves unexpectedly, stop and inspect the setup instead of continuing to turn the turrets.
When the rifle is close, switch off the laser and remove it according to the instructions. A chamber device must never be left in the action when live ammunition is introduced. Store batteries and accessories separately so the pre-zero equipment does not become part of the firing routine.
Confirm The Zero With Live Fire
Take the rifle to a lawful, suitable range and fire a three-shot group at 25 or 50 metres, depending on the range rules and rifle type. Use the ammunition intended for hunting, because bullet weight, construction, and velocity can change the point of impact. This matters in Australia, where ammunition availability and pricing may differ between metropolitan shops and regional dealers.
Allow the barrel to cool as recommended by the rifle maker, then adjust the scope based on the centre of the group. Fire another group to confirm the change. Once the rifle is consistent at the short distance, move to the range at which you intend to hunt, such as 100 metres for many centrefire setups.
Record the ammunition, temperature, distance, and final turret position. A hunting rifle that is zeroed with one load should not automatically be assumed to be zeroed with another. Keep the notes with the rifle’s maintenance records.
Keep Compliance And Field Use In Mind
Australian firearms rules vary by state and territory, so licensing, storage, transport, hunting permission, and permitted firearm use must be checked locally. A licence holder in New South Wales, Victoria, Queensland, Western Australia, or another jurisdiction may face different administrative requirements. Transport the rifle unloaded and secured in accordance with the applicable rules, and use only approved storage at home.
Magazine capacity, firearm category, and the lawful purpose attached to a licence can also affect what is appropriate for a particular hunt. For example, a magazine suitable for a sporting pistol is not automatically relevant to a hunting rifle; separate product research, such as these P320 magazine options, should be kept distinct from rifle setup.
Online research also needs sensible source checking. Technical sighting information should come from firearm manufacturers, established retailers, range professionals, and official authorities, rather than unrelated promotional material such as Australian bonus rounds. Confirm local rules before travelling, particularly when crossing state borders.
Use the boresighter to establish a safe, repeatable starting point, then confirm every adjustment with live fire and a measured group. With careful preparation, accurate records, and proper compliance, your rifle will be ready for responsible range practice and lawful hunting.